We are company with more than 30 years of experience in care and maintenance of your valuable boat. You can expect the best every time you call us for whatever you may need, no matter if it is a 20′ cruiser, or a 200’ foot yacht, you always has our full attention with great rates and reliable service.
Our team is fully insured and dedicated to providing 100% customer satisfaction.
Our services Surfside Miami
Monthly, bi-monthly and one time rates to fit your needs.
- Price Based on Length over All*
INCLUDE:
-Bottom Cleaning from the waterline down
-Complete cleaning of running gear
-Hull inspection
Optional:
-Use of new system with cavitations unit, no scraping.
Why is so important keep your bottom clean?
Barnacles & marine growth on your boat thru hull fittings and running gear.
Maintaining a clean bottom delivers you a maximum performance and fuel economy and avoids costly repairs on the motor.
Our monthly costumers save money by making sure their boat is in its top shape underwater with the experience and dedication of our divers.
We are associated with one of the top propeller services located in South Florida.
Prop Replacements
Propellers 3,4,5,6,7,8 Blade to any diameter.
Removed and Replaced and repaired.
A Propeller chance consists of:
1 – Diver to remove and replace propellers with your spares that are on the dock at the time of service.
2- Diver to remove, take to propeller shop and deliver back and install.
Our basic service includes a thorough wash-down of all fiberglass surfaces and an application of wax to smooth fiberglass surfaces. The type of wax and products used depends upon the condition of the gel coat and the color of the boat and compounding is necessary to restore the shine of the gel coat, after all this a second wash-down complete to finish.
Metal polishing, vinyl seat cleaning / dressing, interior cabin cleaning, are other customized options.
Let us come out and give you a quote and show you why The Lord of the Boats gives you the best service at a great price in the area.
Your boat will shine like when it was new!
In clean air untreated teak weathers to an attractive ash gray, but where most boats live, the assault of modern-day air pollutants quickly turns bare teak nearly black. Scrubbing tends to leave behind an unattractive mottled look, neither golden nor gray. Most boat owners eventually find themselves unhappy with either look and decide that some treatment is essential.
If we want the natural beauty of the wood to show, we must apply a clear coating.
The choices are oil, sealer, or varnish.
Cleaning
Before teak can be given any coating, it must be completely clean.
Oil
Oiling teak on boats is a time-honored tradition. Oil intensifies the colors and grain patterns of wood and gives the wood a rich, warm appearance, and it restores some of the teak’s natural oils and resins. Oiling requires multiple coats. The benefit of oiling exterior teak is transitory.
Sealers
Another approach to achieving a natural look is the application of a sealer. Durability and ease of application have made some sealers very popular with boatowners. Sealers don’t feed the wood but, as the name suggests, they seal out moisture and dirt, and seal in natural oils and resins. Maintain sealed wood by washing it and applying a fresh coat of sealer every two to three months.
Varnish
Aside from its much-admired appearance, varnish offers genuine protection for the wood. Wood coated with varnish will not dry out and split, will not absorb moisture and rot, is unaffected by dirt and pollution, and will be untouched, thus unstained, by oily or greasy spills.
Zincs and Electrolysis
Whenever different metals are placed in a conductive liquid you create a battery. If you connect these pieces of metal together, current will flow. The current will be removing metal from one of the metal pieces = “electrolysis”. If this piece is the zinc in your flashlight battery that is good, but if one of the pieces is your propeller it is bad.
The zincs you use on a boat are called “Sacrificial Anodes”. Zinc is used because it has a higher voltage in the water so the current will be more inclined to flow from it than from your propeller. To complete the electrical circuit, the zincs must be connected to the items they are intended to protect. Usually this is no problem because the zinc is bolted right to the shaft or underwater housing. Non metal boats will usually have a copper bonding wire inside that connects all the underwater metal items together so they all share the protection from zinc anodes. Since engines use the metal frame as the negative battery connection and the engine is connected to the prop shaft, the engine and the negative side of your 12 volt system are also part of this bonding connection. This bonding wire is usually connected somewhere to the rigging. This is not for electrolysis protection but for some protection from lightning strikes to conduct it into the water through the items connected together.
It would be hard to overstate the importance of maintaining the zinc anodes on your boat. When a zinc is gone, the metal component it was installed to protect begins to dissolve-guaranteed.
How much zinc
The amount of protection a zinc anode provides depends on its surface area. The zinc surface area needed varies with the kind of metal being protected and with the chemical make-up of the water, but you can use 1% of the surface area of the protected metal as a starting point. Check the protected metal frequently. If it shows signs of corrosion despite the zinc, you need more surface area.
Zincs should be replaced when 50 % of the anode has been lost to corrosion.
Normally check all zincs at least every 4 to 6 months and replace all that are half depleted. Here are some replacement guidelines.
Electrical contact is essential
For a zinc anode to provide any protection, it must be in electrical contact with the metal being protected or by connecting the two with a wire. The conductivity of the water is not adequate .A hanging anode can provide protection if it is connected by a wire to the metal being protected.
No paint
Zinc anodes cannot perform their function unless they are exposed. Putting paint on zinc smothers it, rendering it useless. Never coat zinc anodes with bottom paint, or anything else.
Props and rudders
Propellers are normally protected by a zinc collar fashioned in two pieces and bolted together around the shaft forward of the propeller. It is essential to make sure the shaft is clean and bright before clamping the collar to it. Corrosion protection for outboard and outdrive propellers is typically provided by a bolt-in-place zinc ring or a zinc prop nut.
Docks products – Sale & installation
Dockside recovery of overboard items
At Surfside Miami
Contact – Project – Quotation
Phone Number US : (001) 786 252-7169
Phone Number Europe : +0336 10 900 413
What People Say About Us
Great job Marcos, exceptional service. Highly recommended!
The staff was great, service was quick very professional and wonderful to work with. Marcos we will be back!
Excelente trabajo y muy responsable👌
Best people ever!!!! Serious, fast and very good price. I definitely recommend them!!!!